Немецкое качество производства оборудования!
CDNE for emission measurement on luminaries acc. EN 55015
CDNE M2
CDNE with tight tolerances for CISPR 15 emission measurements
with 2 mains conductors can also be used as CDNE AF2.
Цена по запросу
»
CA CDNE M2 Part A
Part A of the calibration
or short adapter for CDNE M2
Цена по запросу
»
CA CDNE Part B
Part B of the calibration
or short adapter for CDNE M2 or M3
Цена по запросу
»
SR100-6W
The SR100-6W is an adapter for the calibration of a CDN (e.g. ISN S1, ISN S8) or a CDNE. Therefore it matches the 50 Ω measurement port to the 150 Ω system.
A low inductance resistor of 100 Ω is connected between the inner conductor of the N connector and the 4 mm banana jack. The construction is according to the picture 7 of the standard EN 61000-4-6.
A low inductance resistor of 100 Ω is connected between the inner conductor of the N connector and the 4 mm banana jack. The construction is according to the picture 7 of the standard EN 61000-4-6.
Цена по запросу
- Frequency Range: DC ... 500 MHz
- Max. Power: 6 W
- Line Resistance: 100 Ω
- Output: 4 mm Buchse
- Insertion Loss 2xSR100-6W in series: 9.5 dB +/- 0.5 dB
- Input Connector: BNC 50 Ω
- Weight: 340 g
- Dimensions W x H x D: 105 mm x 64 mm x 70 mm
- Reference Plane: 100 mm x 100 mm x 3 mm
- Grounding: Case bottom
- According to the Standards: EN 61000-4-6
CISPR 15
CISPR 16-1-x
CISPR 16-2-x
»
CDNE M3
CDNE with tight tolerances
for CISPR 15 emission measurements
with 3 mains conductors.
Цена по запросу
»
CA CDNE M3 Part A
Calibration or
short adapter for CDNE M3 part A.
Цена по запросу
»